Troc Phan

Calling me Trọc Phan
Staff member
4R7XgbA.png
Name: Paragon NTFS
Version: 14.2.359
Updated: 15 Aug 2016
Home Page - www.paragon-software.com
Paragon Software Group
© 1994-2015 Paragon Technologie GmbH.
Requirements:


    • Intel, 64-bit processor
    • OS X 10.8 or later
Download: Fshare
Pass: osxvn

---------- Instruction - English ----------​
1. Install Paragon NTFS for Mac 14 -> Restart

2. Uninstall it or you can manual delete these file:

/Library/LaunchDaemons/com.paragon.ntfs14.refresh.plist
/ Library / Application Support / Paragon Software / ntfs14refresh.sh
/ Library / Application Support / Paragon Software / postflightinit.ntfs14

3. Open Terminal (Applications -> Utilities -> Terminal)
Drag file "install_ntfs14_refresh.sh" to Terminal
Press: Intro
Press: and
Press: Intro
enter your password
if error happen, let's run: terminal chmod 755 install_ntfs14_refresh.sh
4. Done

---------- Instruction - Tiếng Việt ----------​
1. Install Paragon NTFS for Mac 14 cài đặt. Khởi động lại.

Nó là cần thiết để kích hoạt.

2. Gỡ cài đặt / tự xóa các file sau:

/Library/LaunchDaemons/com.paragon.ntfs14.refresh.plist
/ Library / Application Support / Paragon Software / ntfs14refresh.sh
/ Library / Application Support / Paragon Software / postflightinit.ntfs14

3. Mở một cửa sổ Terminal (Applications -> Utilities -> Terminal)
Kéo "install_ntfs14_refresh.sh" tập tin trong Terminal
Press: Intro
Press: and
Press: Intro
Nhập mật khẩu quản trị của bạn và Giới thiệu
Nếu lỗi cho phép, chạy lệnh terminal chmod 755 install_ntfs14_refresh.sh
4. Bạn sẽ nhận được 10 ngày dùng thử phiên bản đầy đủ chức năng, với mỗi khởi động lại.

OSXVN - Share to learn: Chúc các bạn thành công!

pEYErrm.png

NTFS for Mac 14 breaks down the barriers between Windows and OS X. Paragon NTFS effectively solves the communication problems between the Mac system and NTFS, providing full read and write access to Windows NTFS partitions under OS X. Excellent solution for end users, SOHO, and enterprise, supports all NTFS versions from Windows NT 3.1 to Windows 8 (NTFS versions 1.2, 3.0, and 3.1), and mounts the NTFS volumes as native ones.

Features
  • Unprecedented high NTFS performance. The transfer rate is the same as with the native HFS file system!
  • Full read/write access to NTFS. OS X provides limited support of NTFS, the primary file system of any Windows® PC. With Paragon’s NTFS for you’ll get full read/write access to any version of NTFS under OS X
  • Support for OS X 10.5 and 10.6 (32 and 64 bit), and OS X 10.7-10.11
  • Easy to install. The driver is easily installed through a new user-friendly wizard
  • Easy to use. Mount any NTFS partition like a native one - no need to perform special commands to get access; just attach a disk or other media with NTFS partition and use it as you wish
  • Create and repair NTFS partitions under the same way you usually do with HFS/HFS+
  • Software update center. Get notifications about new updates and perform them by clicking only one button. That's all you need to do to keep your software updated
  • Non-Roman characters and languages. File and folder names in national languages, including Chinese, Korean, Japanese, Russian
  • No limitation to maximum file/partition size (within OS X and NTFS specifications)
  • Native support for extended attributes


Paragon NTFS for Mac

NTFS for Mac Screencst - MacUpate Promo

KjR6FxX.jpg
Paragon NTFS for Mac 14.2.359


    • Unprecedented high NTFS performance. The transfer rate is the same as with the native HFS file system!
    • Full read/write access to NTFS. OS X provides limited support of NTFS, the primary file system of any Windows® PC. With Paragon’s NTFS for you’ll get full read/write access to any version of NTFS under OS X
    • Support for OS X 10.5 and 10.6 (32 and 64 bit), and OS X 10.7-10.11
    • Easy to install. The driver is easily installed through a new user-friendly wizard
    • Easy to use. Mount any NTFS partition like a native one – no need to perform special commands to get access; just attach a disk or other media with NTFS partition and use it as you wish
    • Create and repair NTFS partitions under the same way you usually do with HFS/HFS+
    • Software update center. Get notifications about new updates and perform them by clicking only one button. That’s all you need to do to keep your software updated
    • Non-Roman characters and languages. File and folder names in national languages, including Chinese, Korean, Japanese, Russian
    • No limitation to maximum file/partition size (within OS X and NTFS specifications)
    • Native support for extended attributes


odq4ytq5nz.jpg








 
4R7XgbA.png
Name: Paragon NTFS
Version: 14.2.359
Updated: 15 Aug 2016
Home Page - www.paragon-software.com
Paragon Software Group
© 1994-2015 Paragon Technologie GmbH.
Requirements:


    • Intel, 64-bit processor
    • OS X 10.8 or later
Download: Fshare
Pass: osxvn

---------- Instruction - English ----------​
1. Install Paragon NTFS for Mac 14 -> Restart

2. Uninstall it or you can manual delete these file:

/Library/LaunchDaemons/com.paragon.ntfs14.refresh.plist
/ Library / Application Support / Paragon Software / ntfs14refresh.sh
/ Library / Application Support / Paragon Software / postflightinit.ntfs14

3. Open Terminal (Applications -> Utilities -> Terminal)
Drag file "install_ntfs14_refresh.sh" to Terminal
Press: Intro
Press: and
Press: Intro
enter your password
if error happen, let's run: terminal chmod 755 install_ntfs14_refresh.sh
4. Done

---------- Instruction - Tiếng Việt ----------​
1. Install Paragon NTFS for Mac 14 cài đặt. Khởi động lại.

Nó là cần thiết để kích hoạt.

2. Gỡ cài đặt / tự xóa các file sau:

/Library/LaunchDaemons/com.paragon.ntfs14.refresh.plist
/ Library / Application Support / Paragon Software / ntfs14refresh.sh
/ Library / Application Support / Paragon Software / postflightinit.ntfs14

3. Mở một cửa sổ Terminal (Applications -> Utilities -> Terminal)
Kéo "install_ntfs14_refresh.sh" tập tin trong Terminal
Press: Intro
Press: and
Press: Intro
Nhập mật khẩu quản trị của bạn và Giới thiệu
Nếu lỗi cho phép, chạy lệnh terminal chmod 755 install_ntfs14_refresh.sh
4. Bạn sẽ nhận được 10 ngày dùng thử phiên bản đầy đủ chức năng, với mỗi khởi động lại.

OSXVN - Share to learn: Chúc các bạn thành công!

pEYErrm.png

NTFS for Mac 14 breaks down the barriers between Windows and OS X. Paragon NTFS effectively solves the communication problems between the Mac system and NTFS, providing full read and write access to Windows NTFS partitions under OS X. Excellent solution for end users, SOHO, and enterprise, supports all NTFS versions from Windows NT 3.1 to Windows 8 (NTFS versions 1.2, 3.0, and 3.1), and mounts the NTFS volumes as native ones.

Features
  • Unprecedented high NTFS performance. The transfer rate is the same as with the native HFS file system!
  • Full read/write access to NTFS. OS X provides limited support of NTFS, the primary file system of any Windows® PC. With Paragon’s NTFS for you’ll get full read/write access to any version of NTFS under OS X
  • Support for OS X 10.5 and 10.6 (32 and 64 bit), and OS X 10.7-10.11
  • Easy to install. The driver is easily installed through a new user-friendly wizard
  • Easy to use. Mount any NTFS partition like a native one - no need to perform special commands to get access; just attach a disk or other media with NTFS partition and use it as you wish
  • Create and repair NTFS partitions under the same way you usually do with HFS/HFS+
  • Software update center. Get notifications about new updates and perform them by clicking only one button. That's all you need to do to keep your software updated
  • Non-Roman characters and languages. File and folder names in national languages, including Chinese, Korean, Japanese, Russian
  • No limitation to maximum file/partition size (within OS X and NTFS specifications)
  • Native support for extended attributes


Paragon NTFS for Mac

NTFS for Mac Screencst - MacUpate Promo

KjR6FxX.jpg
Paragon NTFS for Mac 14.2.359


    • Unprecedented high NTFS performance. The transfer rate is the same as with the native HFS file system!
    • Full read/write access to NTFS. OS X provides limited support of NTFS, the primary file system of any Windows® PC. With Paragon’s NTFS for you’ll get full read/write access to any version of NTFS under OS X
    • Support for OS X 10.5 and 10.6 (32 and 64 bit), and OS X 10.7-10.11
    • Easy to install. The driver is easily installed through a new user-friendly wizard
    • Easy to use. Mount any NTFS partition like a native one – no need to perform special commands to get access; just attach a disk or other media with NTFS partition and use it as you wish
    • Create and repair NTFS partitions under the same way you usually do with HFS/HFS+
    • Software update center. Get notifications about new updates and perform them by clicking only one button. That’s all you need to do to keep your software updated
    • Non-Roman characters and languages. File and folder names in national languages, including Chinese, Korean, Japanese, Russian
    • No limitation to maximum file/partition size (within OS X and NTFS specifications)
    • Native support for extended attributes







Troc Phan

Bác chủ hướng dẫn cách active hộ mình với. Mình làm theo hướng dẫn rồi mà vẫn không ok
Máy vẫn báo số ngày còn lại giảm dần.
 
Bác chủ hướng dẫn cách active hộ mình với. Mình làm theo hướng dẫn rồi mà vẫn không ok
Máy vẫn báo số ngày còn lại giảm dần.
baccomCần download thêm : ntfsmac14_trial_e.dmg và mount vào bạn ạ. Bạn nên đọc ở hướng dẫn và thử lại.
 
Cần download thêm : ntfsmac14_trial_e.dmg và mount vào bạn ạ. Bạn nên đọc ở hướng dẫn và thử lại.
DzungXBác có thể hướng dẫn cụ thể được không ah
Mình cũng down về rồi nhưng chẳng biết cài thế nào để được.
Nhờ bác hướng dẫn với
 
Bác có thể hướng dẫn cụ thể được không ah
Mình cũng down về rồi nhưng chẳng biết cài thế nào để được.
Nhờ bác hướng dẫn với
baccom=========================

Các bước như hướng dẫn em trích lại :


B 1. Install Paragon NTFS for Mac 14 cài đặt. Khởi động lại.

Nó là cần thiết để kích hoạt.

B 2. Gỡ cài đặt / uninstall = file trong link tải

B3. Mount ntfsmac14_trial_e.dmg vừa tải về.

B4. Mở một cửa sổ Terminal (Applications -> Utilities -> Terminal)
Kéo "install_ntfs14_refresh.sh" tập tin trong Terminal
Press: Intro
Press: and
Press: Intro
Nhập mật khẩu quản trị của bạn và Giới thiệu
Nếu lỗi cho phép, chạy lệnh terminal chmod 755 install_ntfs14_refresh.sh

5. Bạn sẽ nhận được 10 ngày dùng thử phiên bản đầy đủ chức năng, với mỗi khởi động lại.
 
=========================

Các bước như hướng dẫn em trích lại :


B 1. Install Paragon NTFS for Mac 14 cài đặt. Khởi động lại.

Nó là cần thiết để kích hoạt.

B 2. Gỡ cài đặt / uninstall = file trong link tải

B3. Mount ntfsmac14_trial_e.dmg vừa tải về.

B4. Mở một cửa sổ Terminal (Applications -> Utilities -> Terminal)
Kéo "install_ntfs14_refresh.sh" tập tin trong Terminal
Press: Intro
Press: and
Press: Intro
Nhập mật khẩu quản trị của bạn và Giới thiệu
Nếu lỗi cho phép, chạy lệnh terminal chmod 755 install_ntfs14_refresh.sh

5. Bạn sẽ nhận được 10 ngày dùng thử phiên bản đầy đủ chức năng, với mỗi khởi động lại.
DzungX

Thanks bác.
Hướng dẫn này em cũng có
Nhưng khi thao tác kéo Kéo "install_ntfs14_refresh.sh" vào Terminal
Mình không biết nhấn intro ở đâu
Ấn Enter thì báo là phải cài ntfsmac14_trial_e.dmg
Hic. bác thông cảm em hơi gà mờ vụ này nên không biết
Bác giúp em đoạn này được không

Thanks bác
 
Thanks bác.
Hướng dẫn này em cũng có
Nhưng khi thao tác kéo Kéo "install_ntfs14_refresh.sh" vào Terminal
Mình không biết nhấn intro ở đâu
Ấn Enter thì báo là phải cài ntfsmac14_trial_e.dmg
Hic. bác thông cảm em hơi gà mờ vụ này nên không biết
Bác giúp em đoạn này được không

Thanks bác
baccom

Tức là bạn phải down cái .dmg về sau đó double click vào trước cái bước kéo install_ntfs14_refresh.sh vào Terminal
nếu bạn đọc dòng warning thì sẽ thấy lỗi do chưa mount ntfsmac14_trial_e.dmg
 
Có bác nào cài được TotalFinder trên os 10.12 không chỉ e với ạ
 
Cần lắm 1 cái link ''ntfsmac14_trial_e.dmg'' , trang chủ thằng Paragon ko có em nay thớt ơi , mấy can chữ ''e" rồi, tải về mount xong vẫn ko install đc, chắc lại quay về với Tuxera cho êm ấm quá @@
 
Trong cái DMG trên trang chủ nó nén cái file cai đặt pkg trong 1 cái thư mục tên là product.zip, giải nén nó ra, sửa script lại the mới dùng đc :((
 
=========================

Các bước như hướng dẫn em trích lại :


B 1. Install Paragon NTFS for Mac 14 cài đặt. Khởi động lại.

Nó là cần thiết để kích hoạt.

B 2. Gỡ cài đặt / uninstall = file trong link tải

B3. Mount ntfsmac14_trial_e.dmg vừa tải về.

B4. Mở một cửa sổ Terminal (Applications -> Utilities -> Terminal)
Kéo "install_ntfs14_refresh.sh" tập tin trong Terminal
Press: Intro
Press: and
Press: Intro
Nhập mật khẩu quản trị của bạn và Giới thiệu
Nếu lỗi cho phép, chạy lệnh terminal chmod 755 install_ntfs14_refresh.sh

5. Bạn sẽ nhận được 10 ngày dùng thử phiên bản đầy đủ chức năng, với mỗi khởi động lại.
DzungXtức là mình cài bản 14 đã active rồi restart,gỡ ra cài bản mới trong topic thì mới active đc phải ko bạn? mình cài như topic thì vẫn bị đếm ngày